logo

the highest quality at the lowest prices

SAVE 60% off Retail Prices on commercial grade carpet tiles

Choose category
care_advice
installation_quote

Need advice? Call 6am-9pm

Visit our Warehouse
3-9 Cook Road, Marrickville NSW 2204
Open Mon - Sat  7am to 5pm
Open Sunday by appointment call vince 0414266267

contactbutton-15109

Banda Pressure Sensitive Adhesive Guide

Learn proper techniques for using Banda pressure sensitive adhesive for installing carpet tiles and luxury vinyl planks. Get tips on application, going off times, coverage rates and volume discounts.

The Ultimate Guide to Using Banda Pressure Sensitive Adhesive

If you're looking for a simple, cost-effective solution for installing carpet tiles or luxury vinyl planks, look no further than Banda pressure sensitive adhesive from CarpetTiles1. This specialized adhesive provides a high-tack, semi-permanent bond that allows for easy repairs and replacements down the road.

In this comprehensive guide, we'll cover everything you need to know about using Banda adhesive, from proper application techniques to volume pricing discounts.

What is Banda Pressure Sensitive Adhesive?

Unlike rock-hard permanent adhesives, Banda is a specialized pressure sensitive glue that remains semi-tacky and never fully cures or dries out (unless affected by dust or water over years of use).

This unique tacky quality provides some huge advantages:

  • Easy Removal - Because Banda doesn't form a permanent rigid bond, you can simply lift individual carpet tiles or luxury vinyl planks when replacements are needed without damaging the subfloor beneath. No special tools like heat guns or chisels required!
  • Simple Maintenance - Need to replace just a few damaged tiles or planks? With Banda, you can peel up the affected areas and simply lay new tiles right into the tacky adhesive. The flexible bond re-activates to grab the new flooring.
  • Semi-Permanent Hold - While Banda doesn't permanently freeze your flooring in place, it does provide more than enough tack and grab to prevent edges from curling or tiles from shifting, even in high-traffic areas.

The Banda "Go Off" Process Before installing your carpet tiles, it's essential to wait for the adhesive to become tacky by "going off" after application. The go off time can range from as little as 15-20 minutes in hot climates to up to an hour in cooler temperatures and humidities.

You'll know the glue has gone off properly when you can press your finger into it and it sticks lightly, allowing you to peel your finger off cleanly. If the glue is still milky white and wet, it requires more time to go off.

For porous substrates like concrete, the go off happens naturally as air exposes the adhesive. But for non-porous surfaces like existing vinyl or ceramic tiles, lack of airflow can severely slow or prevent the necessary go off. In these scenarios, it's recommended to use fans to help the Banda glue go tacky by force drying the air exposure.

Application Techniques When it comes to actually applying Banda adhesive, there are two primary recommended techniques:

Sponge or Nylon Roller

Using a sponge or thin nap roller, simply roll or "paint" the adhesive onto the subfloor in a uniform, maximum 1mm thick coat. This provides excellent transfer and coverage.

Flat Trowel

Some installers prefer using a flat, non-notched trowel to spread Banda in a thin, even coat, ensuring it gets into any cracks or crevices.

Whichever method you use, avoid notched adhesive trowels designed for permanent adhesives. The notches allow excess buildup that can gum up in carpet tile edges and ruin the pressure sensitive effect.

Coverage and Pricing Banda comes in two drum sizes - a larger 15L option and a smaller 5L. The coverage rates are:

  • 15L Drum - Covers approximately 120-140 square meters
  • 5L Drum - Covers approximately 40-50 square meters

Of course, exact coverage can vary based on your specific subfloor texture, application thickness, and waste factors. But these are good rules of thumb.

Get Easy Installation and Repair With Banda

Whether you're a professional installer or DIY homeowner, having the right carpet tile adhesive makes all the difference. Banda Pressure Sensitive Adhesive allows you to lay floors quickly and confidently, knowing future repairs and replacements are just a peel away.

With its innovative tacky formulation, Banda eliminates the headaches of permanent adhesives chipping and damaging your subfloor. You can easily swap out tired or worn sections without redoing entire rooms. Combine that with the incredible value of our multi-drum discounts, and you have an affordable, versatile flooring solution.

Visit our website to learn more about Banda

Monday May 27th 2024Vince